How much electricity does an instant hot water dispenser use?
The power of an instant hot water dispenser is relatively high. Many consumers' first impression is that it consumes electricity. In fact, this is a wrong impression. Instant hot water dispensers are very energy-saving.
As we all know, power consumption = power x duration.
It is true that the power of an instant hot water dispenser is high, but the heating time is very short. An instant hot water dispenser can heat up immediately after it is turned on. In this case, the actual power consumption is not too high;
For an electric heating kettle, it is necessary to heat the whole kettle of water in advance. After heating, it is easy to have excess hot water and insufficient hot water that needs to be reheated. The actual power consumption may be higher than expected.
Our 4L instant hot water dispenser, 24H repeated heating standby power consumption ≤0.5KW.h/24h. Ensuring that you have hot water available 24 hours a day.
|
4.0L Digital Water Boiler Tank |
||
|
Size |
310*205*286.4mm |
|
|
Specification |
Rated voltage |
220-240V/50HZ ,110-120V/60HZ |
|
rated power |
2200W |
|
|
24H repeated heating standby power consumption (set the maximum temperature to 98℃, reduce 5℃ and reheat, heating every 90 minutes) |
≤0.5KW.h/24h |
|
|
24H electronic accessories standby power consumption |
≤5W.h/24h |
|
|
Rated capacity of heating tank |
4.0L |
|
|
Protection against electric shock |
Category I |
|
|
heating method |
Electric heating tube heating |
|
|
Heating capacity |
26L/H |
|
|
Water outlet system |
Temperature adjustment range |
45-98℃ |
|
Hot water temperature control accuracy range |
±1℃ |
|
|
Quantitative hot/cold water output |
Yes |
|
|
Synchronous heating of hot water output |
Yes |
|
|
Water output accuracy requirements |
±5% |
|
|
Water flow |
Normal temperature：＞3.2L/min |
|
|
Hot water：＞2.2L/min |
||
|
Function |
Preset heating temperature setting value |
45-55-65-75-85-90-91-92-93-94-95-96-97-98℃ |
|
Default cooldown reheat temperature setting value |
5℃ |
|
|
Presettable cooling setpoints |
3-5-7-9℃ |
|
|
Using delayed startup for the first time |
None (built-in high-temperature float) |
|
|
First heating time (water inlet temperature 20℃) |
10-12min |
|
|
Reheating time (water inlet temperature 20°C, preset maximum temperature 98°C, 2L of water discharged) |
3-5min |
|
|
noise |
＜45dB |
|
|
Machine Certification |
CCC, UL, GS, CE, CB, UKCA, SII, ERP, RCM, WATERMARK, NSF, WRAS, ROSH, REACH, PAHs, SCCP |
|