Xiamen Smart Water Tech Passes 2026 WaterMark Annual Product Surveillance
Author: [2026-10-18] | By Xiamen Smart Water Technology Co., Ltd. Allen Huang allen@kitchenwatertap.com
Xiamen Smart Water Technology Co., Ltd. successfully passed its 2026 WaterMark annual product surveillance on October 17, 2026, maintaining an important part of its compliance commitment for applicable plumbing products supplied to the Australian market. For importers, distributors, plumbing companies, kitchen brands, and private-label buyers, ongoing WaterMark surveillance provides additional assurance that certified products remain subject to the scheme's continuing compliance requirements.
As a boiling water tap manufacturer and ODM partner for international drinking water system brands, Xiamen Smart Water Tech understands that market access depends on more than product design. Manufacturing controls, product testing, and continued certification obligations also matter. This annual surveillance milestone reflects the company's ongoing attention to product compliance and quality management.
Xiamen Smart Water Tech Completes Its 2026 WaterMark Annual Surveillance
On October 17, 2026, Xiamen Smart Water Technology Co., Ltd. passed its 2026 WaterMark annual product surveillance.
WaterMark is an Australian plumbing product certification scheme referenced by the Plumbing Code of Australia. It applies to specified plumbing and drainage products that must meet relevant requirements before they can be legally supplied or installed for regulated uses.
For manufacturers serving Australia, WaterMark certification is not simply a one-time approval. The scheme includes product assessment, manufacturing-site quality requirements, and ongoing surveillance during the certification lifecycle.
Successfully completing the 2026 annual surveillance is an important compliance milestone for Xiamen Smart Water Tech. It supports the company's continued focus on supplying drinking-water and boiling water tap systems for international customers, subject to the scope and conditions of the applicable certification.
What Is WaterMark Certification?
WaterMark is a certification scheme administered by the Australian Building Codes Board (ABCB) on behalf of the Australian Government. Its purpose is to help ensure that covered plumbing and drainage products are fit for purpose and appropriately authorised for use.
Whether a specific boiling water tap, faucet, or related component requires WaterMark certification depends on the product category, intended use, and applicable Australian requirements. Buyers should therefore check the certification scope for the exact product model rather than assume every plumbing product is covered in the same way.
Key facts about the WaterMark scheme
| Item | Details |
|---|---|
| Certification scheme | WaterMark Certification Scheme |
| Administering body | Australian Building Codes Board (ABCB) |
| Regulatory context | Plumbing Code of Australia |
| Main purpose | Assess whether covered plumbing and drainage products are fit for purpose and authorised for applicable uses |
| Product assessment | Type testing against the applicable specification, where required |
| Manufacturing assessment | Manufacturing-site quality plan and production controls are assessed |
| Certification lifecycle | Five years under the scheme framework, subject to applicable scheme requirements |
| Product surveillance | At least once every 12 months during the certification lifecycle |
| Product identification | WaterMark must be displayed as required by the applicable scheme rules |
The requirements for individual products depend on their applicable certification specifications and approval conditions. Buyers should consult the current WaterMark listing and relevant certification documents when confirming product eligibility.
Why Annual WaterMark Product Surveillance Matters
Initial certification assesses a product against the relevant requirements and evaluates the manufacturer's ability to produce compliant products. Annual surveillance helps maintain oversight after the original certification has been granted.
For manufacturers, surveillance is an opportunity to demonstrate that the required manufacturing controls and compliance arrangements remain in place. For buyers, it provides an additional checkpoint when assessing a supplier for the Australian market.
The WaterMark framework includes several important elements:
1. Manufacturing-site quality assessment
The certification process includes an assessment of the manufacturer's quality plan and its ability to manufacture products consistently. Batch testing capability is also assessed as required by the applicable certification process.
These controls are relevant to products such as plumbing fittings and drinking-water components, where material selection, assembly, and production consistency can affect product performance.
2. Product testing against applicable specifications
Products are type-tested at accredited laboratories where required to establish compliance with the relevant specification. The applicable test requirements depend on the product category and certification scope.
Testing and assessment help determine whether the product meets the requirements relevant to its intended use.
3. Ongoing surveillance during the certification lifecycle
WaterMark certification operates within a five-year lifecycle, with product surveillance required at least every 12 months during that period. Certification remains subject to the scheme's applicable conditions and continuing requirements.
Xiamen Smart Water Tech's successful surveillance on October 17, 2026, marks completion of its annual review milestone for 2026.
What This Means for Boiling Water Tap Buyers in Australia
For importers, distributors, kitchen brands, plumbing companies, appliance brands, and private-label buyers, supplier compliance should be checked before a product is selected for a new market.
WaterMark certification can be an important part of that assessment when the product falls within a category for which certification is required. However, the certification status of one product should not automatically be applied to every model or component from the same manufacturer.
Before placing a bulk order, buyers should confirm:
- Exact model coverage: Check that the intended boiling water tap or plumbing product is included within the relevant certification scope.
- Current certification status: Verify the product's listing and certification details.
- Manufacturing information: Confirm the certified manufacturing site and any relevant conditions.
- Product marking: Check the WaterMark marking and identification requirements that apply to the product.
- Market-specific compliance: Determine whether additional electrical, material, or product requirements apply to the complete system.
- Technical documentation: Request the applicable product specifications, installation instructions, and supporting compliance documents.
These checks help buyers assess whether a product is suitable for their intended Australian distribution, installation, or private-label programme.
Xiamen Smart Water Tech: Boiling Water Tap Manufacturing and ODM Support
Xiamen Smart Water Technology Co., Ltd. manufactures boiling water taps and drinking-water systems and works with international brands on ODM projects. Its product development and manufacturing scope supports customers looking for different faucet designs, water functions, and under-sink system configurations.
For commercial buyers, product development and compliance review should be considered together. A design change, new component, or different market configuration may affect the documentation or approvals required for a particular product.
Depending on project requirements, buyers can discuss:
| Project area | Details to confirm |
|---|---|
| Product type | Boiling water taps, multifunction faucets, and compatible drinking-water systems |
| Faucet design | Available shapes, handle styles, and finish options |
| System configuration | Compatible boiler, filtration, and other under-sink components |
| Manufacturing model | OEM/ODM cooperation and private-label requirements |
| Certification | Applicable WaterMark scope and other destination-market requirements |
| Quality documentation | Relevant quality controls, testing records, and product documents |
| Commercial planning | Minimum order quantity, lead time, packaging, and after-sales arrangements |
The appropriate configuration depends on the target market, product specification, expected sales volume, and required compliance documentation.
Quality and Compliance: Part of Long-Term Manufacturing
Xiamen Smart Water Tech places emphasis on product quality and manufacturing controls. The company works with international customers who need a supplier capable of supporting product development, production, and market-specific compliance discussions.
Its broader compliance portfolio may include requirements or approvals such as CE, CB, UL, WRAS, NSF, and WaterMark, depending on the product and destination market. These approvals are not interchangeable, and each must be checked against the exact model, applicable standard, and intended use.
Passing the 2026 WaterMark annual product surveillance on October 17, 2026, is a concrete milestone in the company's ongoing compliance work. Buyers sourcing plumbing products for Australia should still verify the current certification listing and scope before purchase.
Frequently Asked Questions
1. Did Xiamen Smart Water Tech pass its 2026 WaterMark annual surveillance?
Yes. Xiamen Smart Water Technology Co., Ltd. passed its 2026 WaterMark annual product surveillance on October 17, 2026.
2. What is WaterMark certification in Australia?
WaterMark is an Australian certification scheme administered by the Australian Building Codes Board. It applies to specified plumbing and drainage products and helps establish that covered products meet relevant requirements for their intended use.
3. Is WaterMark certification mandatory for all boiling water taps?
Yes, WaterMark certification is mandatory in Australia for boiling water taps and connected plumbing/hot water systems that interface with the mains water supply
4. How often does WaterMark product surveillance take place?
The scheme requires product surveillance at least every 12 months throughout the five-year certification lifecycle, subject to the applicable scheme requirements.
5. What is assessed during WaterMark certification?
The process can include product type testing against applicable specifications, an assessment of the manufacturing-site quality plan, and evaluation of the manufacturer's ability to manufacture and batch-test products as required.
6. Does passing annual surveillance mean every product from the manufacturer is WaterMark certified?
No. Certification applies to products covered by the relevant approval and its scope. Buyers should check the current listing, model numbers, manufacturing details, and applicable conditions.
7. Can international buyers source boiling water taps from Xiamen Smart Water Tech?
Xiamen Smart Water Tech works with international brands and commercial buyers on boiling water tap and drinking-water system manufacturing. Buyers can discuss OEM/ODM requirements, product configuration, technical documentation, and destination-market compliance with the company.
Contact Xiamen Smart Water Tech For Boiling Water Tap And ODM Projects
Are you an importer, distributor, kitchen brand, plumbing company, appliance brand, or private-label buyer looking for a boiling water tap manufacturer for the Australian market?
Xiamen Smart Water Technology Co., Ltd. welcomes enquiries about boiling water tap systems, multifunction kitchen faucets, ODM manufacturing, and product compliance requirements. Share your target market, preferred product configuration, estimated order volume, and required approvals so the team can assess your project.
For more commercial data, please contact us