Analysis of the advantages of stainless steel faucets
Author: Allen Huang 2024-06-23
At present, most faucets in the market are electroplated with copper. However, the market for stainless steel faucets is expanding, and now it is growing at an average of about 5% per year. In 2023, the market for stainless steel faucets in China reached 81.83 billion yuan.
The growth in sales of stainless steel faucets is a new trend in the market. Stainless steel faucets have advantages that copper faucets cannot touch. Due to the high difficulty of processing, the price of stainless steel faucets is slightly more expensive than copper faucets, but some classic styles have reached the same price as copper faucets, so stainless steel faucets are the future faucet stars.
Advantages of stainless steel faucets
a. Stainless steel faucets are safe and lead-free, free of corrosion and exudate, without odor or turbidity problems, and will not cause secondary pollution to water quality, keeping the water pure and hygienic and fully guaranteeing sanitary safety.
Field corrosion test data show that the service life of stainless steel can reach 100 years, and almost no maintenance is required during the life cycle, avoiding the cost and trouble of faucet replacement and low operating costs. Achieve the same life of stainless steel faucets as buildings.
b. 304# stainless steel is lead-free, rust-free, environmentally friendly and hygienic. It is a global consensus that stainless steel products do not need to be electroplated. In the process of polishing the surface, as long as the powder and dust generated by the polishing material are filtered well, the pollution to the air environment is very small. At present, no occupational disease is caused by stainless steel polishing.
c. It has not only sanitation and cleaning functions but also health care functions, appreciation functions and entertainment functions. In terms of use functions, stainless steel faucets tend to be more humane.
Current defects of copper faucets
a. Usually, copper materials and copper faucet castings contain a certain amount of lead. The lead content of cooperative faucets will not cause health risks, but it would be a better choice if there is no lead. If the faucet is not used for a long time, green copper rust will be produced on the inner wall, and the lead and other harmful substances in it may be released into the tap water.
b. The surface of the copper faucet needs to be electroplated, which brings serious environmental pollution. The copper surface treatment method is nickel plating and chromium plating. The surface is not resistant to acid and alkali, and cannot be cleaned with detergent and hard towels. It is inconvenient to care for. It will gradually lose its surface gloss and develop pitting within 2-3 years at the fastest and 5-8 years at the slowest. Finally, the electroplating layer will peel off, revealing copper rust.
