Sep 27, 2024

What is the electroplating process?

Leave a message

What is the electroplating process?

 

By Smart Water Tech  Allen Huang        2024-09-27

 

 

Electroplating is the process of plating a thin layer of other metals or alloys on certain metal surfaces using the principle of electrolysis. According to the composition of the coating, the electroplating process can be divided into 8 categories: chrome plating, copper plating, cadmium plating, tin plating, zinc plating, nickel plating, gold plating, and silver plating.

Next, this article will detail the principles and characteristics of the 8 major electroplating processes.

 

Chrome plating

 

Chromium is a silvery-white metal with a slight sky-blue tint. It has strong passivation properties and quickly passivates in the atmosphere, showing the properties of precious metal, so the chrome plating on iron parts is a cathode plating. The chromium layer is very stable in the atmosphere and can maintain its luster for a long time. It is very stable in corrosive media such as alkali, nitric acid, sulfide, carbonate and organic acid, but it is soluble in hydrohalic acid such as hydrochloric acid and hot concentrated sulfuric acid.

 

The chromium layer has high hardness, good wear resistance, strong reflective ability and good heat resistance. There is no obvious change in gloss and hardness below 500°C; oxidation and discoloration begin when the temperature exceeds 500°C; it begins to soften when it is greater than 700°C. Due to the excellent properties of the chrome plating layer, it is widely used as the outer layer and functional plating layer of the protective-decorative plating system. Chrome plating is often used in the surface treatment of kitchen faucets.

 

Copper plating

 

The copper plating layer is pink and soft, has good ductility, electrical conductivity and thermal conductivity, is easy to polish, and can be obtained through proper chemical treatment to obtain decorative colors such as bronze, copper green, black and natural color. Copper plating easily loses its luster in the air, and a layer of basic copper carbonate or copper chloride film is formed on the surface when it reacts with carbon dioxide or chloride. When it is exposed to sulfide, brown or black copper sulfide is formed. Therefore, as a decorative copper plating layer, an organic covering layer needs to be applied on the surface. Because copper plating is easy to oxidize, it is rarely used in faucets.

 

Cadmium plating

 

Cadmium is a soft, silvery-white, shiny metal that is harder than tin and softer than zinc. It has good plasticity and is easy to forge and roll. The chemical properties of cadmium are similar to those of zinc, but it does not dissolve in alkaline solution, dissolves in nitric acid and ammonium nitrate, and dissolves very slowly in dilute sulfuric acid and dilute hydrochloric acid. Cadmium vapor and soluble cadmium salts are both toxic, and cadmium pollution must be strictly prevented. Because cadmium pollution is very harmful and expensive, zinc plating or alloy plating is usually used to replace the cadmium plating.
The types of cadmium plating solutions used more frequently in production are amino carboxylic acid complex cadmium plating, acid sulfate cadmium plating, and cyanide cadmium plating. In addition, there are pyrophosphate cadmium plating, alkaline triethanolamine cadmium plating, and HEDP cadmium plating.

 

Tin plating

 

Tin has a silvery-white appearance, an atomic weight of 118.7, a density of 7.3g/cm3, a melting point of 231.89℃, and an atomic valence of divalent and tetravalent, so the electrochemical equivalents are 2.12g/A·h and 1.107g/A·h respectively. Tin has the advantages of corrosion resistance, non-toxicity, easy iron soldering, softness and good ductility.
Tin plating has the following characteristics and uses:

(1) High chemical stability;

(2) In the electrochemical sequence, the standard potential of tin is positive to that of iron, and it is a cathodic coating for steel. It can effectively protect the substrate only when the coating is free of pores;

(3) Tin has good conductivity and is easy to solder;

(4) Tin crystallizes and begins to mutate at -130°C, and will completely transform into a crystalline allotrope at -300°C, commonly known as "tin plague", at which point it has completely lost its properties;

(5) Like zinc and cadmium plating, tin can grow into whiskers under high temperature, humidity and closed conditions, which are called long hairs;

(6) After tin plating, it can be re-dissolved in hot oil above 231.89°C to obtain a shiny patterned tin layer, which can be used as a decorative coating for daily necessities.

 

Galvanized

 

Zinc is easily soluble in acid and alkali, so it is called an amphoteric metal. Zinc hardly changes in dry air. In humid air, a basic zinc carbonate film will form on the surface of zinc. In sulfur dioxide, hydrogen sulfide and marine atmospheres, zinc has poor corrosion resistance, especially in high temperature, high humidity and organic acid atmospheres, the zinc coating is very easy to corrode. The standard electrode potential of zinc is -0.76V. For steel substrates, zinc coating is an anodic coating. It is mainly used to prevent steel corrosion, and its protective performance is closely related to the thickness of the coating.

After passivation, dyeing or coating with a light protector, the zinc coating can significantly improve its protective and decorative properties. With the development of zinc plating technology and the adoption of high-performance zinc plating brighteners, zinc plating has entered protective-decorative applications from a simple protective purpose.
There are two types of zinc plating solutions: cyanide plating solutions and non-cyanide plating solutions. Cyanide plating solutions are divided into micro-cyanide, low-cyanide, medium-cyanide, and high-cyanide. Cyanide-free plating solutions include alkaline zincate plating solutions, ammonium salt plating solutions, sulfate plating solutions, and ammonia-free chloride plating solutions. Cyanide zinc plating solutions have good leveling ability produce smooth and delicate coatings, and have been used in production for a long time. However, due to the high toxicity of cyanide and serious environmental pollution, low-cyanide, micro-cyanide, and non-cyanide zinc plating solutions have been used.

 

Nickel Plating

 

1. The electroplated nickel layer is very stable in the air. Since metal nickel has a strong passivation ability, it can quickly form a very thin passivation film on the surface, which can resist the corrosion of the atmosphere, alkali and some acids.
2. The electroplated nickel crystals are extremely fine and have excellent polishing properties. The polished nickel coating can obtain a mirror-like glossy appearance and can maintain its gloss for a long time in the atmosphere. Therefore, the electroplated layer is often used for decoration.
3. The hardness of the nickel coating is relatively high, which can improve the wear resistance of the surface of the product. In the printing industry, nickel plating is often used to improve the hardness of the lead surface. Since metal nickel has a high chemical stability, some chemical equipment also often uses thicker nickel plating to prevent corrosion by the medium. Nickel plating is also widely used in functional aspects, such as repairing worn and corroded parts and using brush plating technology for local electroplating. The electroforming process is used to manufacture electroforming plates, record molds and other molds in the printing industry. The thick nickel plating layer has good wear resistance and can be used as a wear-resistant coating. Especially in recent years, composite electroplating has been developed, which can deposit a composite nickel coating with wear-resistant particles, and its hardness and wear resistance is higher than that of nickel plating. If graphite or fluorinated graphite is used as dispersed particles, the obtained nickel-graphite or nickel-fluorinated graphite composite coating has good self-lubricity. It can be used as a lubricating coating. Black nickel plating is also widely used as a coating or decorative coating for optical instruments.
4. Nickel plating has a wide range of applications. It can be used as a protective decorative coating on the surface of steel, zinc die-castings, aluminum alloys and copper alloys to protect the base material from corrosion or to play a bright decorative role; it is also often used as an intermediate coating for other coatings, on which a thin layer of chromium or a layer of imitation gold is plated, which has better corrosion resistance and a more beautiful appearance. Regarding functional applications, nickel plating about 1~3mm thick on parts in special industries can achieve the purpose of repair. Especially in the continuous casting crystallizer, the mold on the surface of electronic components, the die-casting mold of alloys, the complex shape of aerospace engine parts and the manufacture of microelectronic components etc., it is more widely used.

 

Gold plating

 

The electroplated gold coating has strong corrosion resistance, good conductivity, easy welding, high-temperature resistance, and certain wear resistance (such as hard gold doped with many other elements). It has good anti-discoloration ability. At the same time, gold alloy coating has a variety of tones, and gold plating on silver can prevent discoloration. In addition, the coating has good ductility and is easy to polish, so it is often used as a decorative coating, such as for jewelry, watch parts and artwork. It is also widely used in electroplating parts that require long-term stable electrical parameter performance, such as precision instruments, printed boards, integrated circuits, electronic tube shells, and electrical contacts. However, due to the high price of gold, its application is subject to certain restrictions.

 

Silver Plating

 

Silver plating prevents corrosion and increases conductivity, reflectivity and beauty. It is widely used in the manufacturing industries of electrical appliances, instruments, meters and lighting appliances. For example, when copper or copper alloy parts are silver-plated, they must first be degreased and rusted, then pre-plated with thin silver or immersed in a solution made of mercuric chloride, etc., for mercerization treatment so that a layer of mercury film is plated on the surface of the parts. The parts are used as cathodes and pure silver plates as anodes, immersed in potassium silver cyanide electrolyte made of silver nitrate and potassium cyanide, and electroplated. Cyanide-free silver plating is also used in industries such as electrical appliances and instruments. The electroplating solution uses thiosulfate, sulfite, thiocyanate, ferrocyanide, etc. To prevent the silver plating from changing color, it is usually necessary to undergo post-plating treatment, mainly brightening, chemical and electrochemical passivation, plating of precious metals or rare metals, or coating of covering layers.

 

 

The above are the differences between the 8 major electroplating processes. Chrome plating, nickel plating, and gold plating are commonly used for kitchen faucets.

 
Send Inquiry