How to Clean a Kitchen Faucet Aerator
The function of the faucet aerator is to add air to the water. When air enters the water, it will turn into bubbles, making the water flow softer. At the same time, it can also increase the contact area between water and skin (objects) to achieve the purpose of saving water.
How does the aerator add air to the water?
The inside of the aerator is a layer-by-layer mesh structure. When water passes through so many layers of mesh, air can be mixed in. But at the same time, these meshes also act as "filters" by the way, intercepting many impurities in the water.
When these meshes are dirty and the mesh is blocked, water cannot pass smoothly. What we see is that the water flow becomes smaller.

How to Clean a Kitchen Faucet Aerator?
If the filter of the faucet aerator is dirty, it must be cleaned.
Use a wrench (or even barehanded for those with more strength) to clamp the edge of the faucet aerator - for easy disassembly, the aerator is not completely round, but a flat force position is reserved.
After clamping the aerator, apply force from right to left (clockwise) to unscrew the aerator. Hold the aerator in your hand and you can see the dirt on the filter.
Next, turn the aerator over and look at the mesh at the end where the water comes out. Observe whether there is scale here - if not, you can put the aerator back. If there is, you need to take a cup, add hot water and citric acid descaling agent, and soak the aerator in it for a few hours.
After cleaning the aerator, the water flow will be improved. But if the water flow is still not large enough (not as large as when the aerator is not installed), it may be because the mesh in the middle of the aerator is blocked. At this time, the only way to solve the problem is to replace the aerator with a new one.
